Characteristics
■ Level, Level/interface measurement in liquids, solids, hygienic and extreme conditions.
■ The user interface of the product can be adjusted through mobile phone or remote parameter setting can be supported without going to on-site.
■ Density fluctuations, steam generation or strong pressure and temperature fluctuations do not influence the measuring result.
■ Build-up on the probe or the vessel wall do not influence the measurement
■ Product adopts innovative multi-echo tracking technology, built-in storage of factory pre-calibration data, reliable measurement under fluctuating liquid levels and foams.
■ One digital and 2 current output options available, self-monitoring meets theNE43/NE107 standards.
■ Real-time measurements with inside overvoltage protection.
■ It supports the connection of tank tables to achieve distributed display and debugging.
Gas-phase compensation
Gas phase compensation with reference signal (ANL-8010H-GP)
In the high-pressure application, the propagation speed of GWR signals is reduced in the steam (polar media) above the liquid to be measured. As a result, the Level signal indicates the level too low.
As an option ANL-8010H-GP version is available in a version with automatic gas phase correction, which corrects this error. (option Gas Phase Compensation G= 300mm/550mm). This version of the ANL-8010H-GP generates a reference reflection in the distance G from the flange by a diameter step of the probe rod.
NOTE: The reference reflection must be at least 150 mm above the highest level. By means of the shift of the reference reflection the actual propagation speed is measured and the level value will be automatically corrected. with reference reflection can be installed in any tank (free in the tank or into a bypass). Coax probes are completely mounted and adjusted ex works. Rod probes are only recommended if the installation of a coax probe is not possible (e.g. if the bypass diameter is too small).
Rod probes with reference reflection are only suited for mounting in stilling wells and side gauges (bypasses).
Level measurements with high pressure for measuring ranges up to a few meters in polar media with a dielectric constant DK > 7 (e.g. water or ammonia), which would cause a high measuring error without the compensation.
Specifications
ANL-8010H - x | Rod | Cable | Coax |
---|---|---|---|
Max. measuring range | Max. 6m / Level or Level & Interface | Max. 45m / Level or Level & Interface | Max. 6m / Level or Level & Interface |
DK value | DK >1.4 | DK >1.6 @ ≤15m, DK >2.0 @ >15m | DK >1.2 |
Probe | Ø 8 / Ø 10 (default) / Ø 12mm | Ø 2 / Ø 4 / Ø 6mm (default) | Ø 22 / Ø 32(default) / Ø 42mm |
Process fitting / Material wetted parts | Thread G1, G1½, NPT/ Flanges >= DN50, 304L/316L/Alloy C (options), Borosilicate glass, graphite Dual seal and meet the ASNI/ISA 12.27.01 specifications |
||
Ambient temperature | -40 … +85 °C / -60 … +105 °C (cool version) | ||
Process temperature | -196°C … +450°C | ||
Max. process pressure | -1 … 4MPa | -1 … 4MPa | -1 … 4MPa |
Measuring accuracy |
level: ±2 mm |
level: ±2 mm@<=15M, ±6 mm@>15M |
level: ±1 mm |
Signal output | 4-20 mA/HART7 2-wire, 4-20 mA/HART7 4-wire, Profibus PA / DP, Ethernet-APL, Modbus protocol 4-wire | ||
Variables influencing meas. accuracy |
Specifications for the digital measured value |
||
Indication/Adjustment |
1. 160x80 LCD FSTN RGB backlight monitor adapter with keyboard module, operation Temp. -20°C … 70°C. |
||
Power supply | 14.5V ~ 40 VDC / Load resistor > 600Ω | ||
Wireless communication | Bluetooth 5.0 (Bluetooth 4.0 LE compatible), communication range 40m, in rainy day 20m | ||
Approvals | Ex ia IIC T6 Ga IP67; Ex d IIC T6 Gb IP67 | ||
Housing | Single chamber / Double chamber, Aluminum / Stainless steel / Plastic PBT, IP66 / IP67 / IP68 | ||
Applications | liquids, solids, hygienic and extreme condition high-temperature and high-pressure applications |
Dimensions
Aluminum housing
Stainless steel housing
Plastic housing
Indication/Adjustment Adapter
Application installation