Characteristics
■ 80GHz Frequency FMCW radar system.
■ Measurement application in liquids, solids.
■ High-temperature (<450°C) application, also in the liquid which be heated with steam.
Specifications
| ANL-9080N80-2 | Lens material PTFE | Lens material PEEK | N60 (cool version) |
|---|---|---|---|
| Max. measuring range | 40M | 40M | 40M |
| Near blind spot | <100mm from the flange down surface | ||
| Tx/Rx frequency | Tx/Rx frequency 76.2 to 80.2GHz Dynamic FM Sweep Bandwidth 1~4GHz (The adjustment FM range can be customized according to the ISM requirements of the customer’s region) |
||
| Meas. Principle | FMCW Radar System | ||
| Lens Antenna Medium | PTFE Φ80mm | PEEK Φ80mm | PEEK Φ80mm |
| Antenna beam / Gain | Beam angle 4.5°/ Gain 31.9dB | Beam angle 4.5°/ Gain 30.5dB | |
| Meas. Resolution | 0.1mm (<10m range) | ||
| Meas. Accuracy | ±2 mm | ||
| Ambient temperature | -40 … +85 °C | -60 … +105 °C | |
| Process temperature | -40°C … +450°C | -60°C … +450°C | |
| Process pressure | -0.2 ~ +0.5MPa | -1.0 ~ +3.5MPa | |
| Process connection | Flanges ≥DN80 | ||
| Signal output | 4-20 mA/HART7 2-wire, 4-20 mA/HART7 4-wire, Profibus PA / DP, Ethernet-APL, Modbus protocol 4-wire | ||
| Variables influencing meas. accuracy |
Specifications for the digital measured value： Temperature drift - Digital output: ±1mm/10K relating to the max. measuring range or max. 15 mm Additional deviation through electromagnetic interference acc. to EN-61326: < ±10 mm Specifications apply also to the current output Temperature drift - Current output: ±0.01%/10K relating to the 16.7 mA span or max. ±0.15% Deviation in the current output due to digital/analogue conversion Non-Ex and Ex-ia version: < ±1μA; Ex-d-ia version: < ±1μA Additional deviation through electromagnetic interference acc. to EN-61326: < ±150μA |
||
| Indication/Adjustment (LOI) |
1. 160x80 LCD FSTN RGB backlight monitor adapter with keyboard module, operation Temp. -20°C … 70°C. or 128x64 OLED monitor adapter with keyboard module, operation Temp. -55°C … 80°C. (option) or 230x240 LCD TFT colors monitor adapter with keyboard module, operation Temp. -20°C … 70°C. (option only for 4-wrie system) 2. (APP) Radar MobileManager via BT wireless connection 3. (PC software) Radar PCManager /or Via a PC with PACTware/DTM (an interface converter AiW-305 USB CONNECT is required) |
||
| Power supply | 16V ~ 40 VDC / Load resistor > 600Ω | ||
| Wireless communication | Bluetooth 5.0 (Bluetooth 4.0 LE compatible), communication range 40m, in rainy day 20m | ||
| Approvals | Ex ia IIC T6 Ga IP67; Ex d IIC T6 Gb IP67 | ||
| Housing | Single chamber / Double chamber, Aluminum / Stainless steel / Plastic PBT, IP66 / IP67 / IP68 | ||
| Applications | liquids, solids, high-temperature applications | ||
| Document Download |  MKT-24 ANL9080N80-2_Datasheets_EN[DY0316] |
Dimensions
The following dimensional drawings represent only an extract of all possible versions. Detailed dimensional drawings can be
downloaded at www.chinasimba.com/downloads under "Drawings".
DTM Adapter
AiW-305 USB Converter Adapter
Remote programmer cum Indicator Adapters
Remote indicator with HART compatible (RDM-25)
Remote indicator via Serial communication (LRD-21)
Remote indicator via Bluetooth communication
ANL9080 radar level transmitters (with Bluetooth function) can be connected to mobile phone through Bluetooth wireless system. The mobile phone needs to
install the RadarMobileManager APP. This is a free registered APP (Android and IOS etc.) software, which can be downloaded and installed directly in major
APP Stores, or please contact the relevant product suppliers.
The Radar Antenna Specification of the ANL-9080-2 （Datasheet download)
Thermal simulation graph for the ANL-9080-2 （Datasheet download)
Aluminum housing
Stainless steel housing
Plastic housing
Indication/Adjustment LOI Adapter
